D-30T, D-40T, D-60T Models
For Tubing sizes .050-.500" on carriers, spools, or coils up to 6,000 lbs.
Regenerative DC drive and accumulation provide balanced tension control
Dereeler will not change or distort tubing cast
Speed, acceleration and deceleration are electronically controlled
UHMW Pulleys provide a high-wear, non-marking surface for guiding tubing
Tension is adjustable to handle a variety of material sizes and shapes
Units available to handle ferrous and non-ferrous tubing
Model | D-30 | D-40 | D-60 |
Capacity | 3000 lbs | 4000 lbs | 6000 lbs |
Speed (RPM)* | 0-46 | 0-47 | 0-35 |
Table Size / Spool O.D. | 45/50" | 60" | 72" |
Tubing Size # | .050"- .500" | .050"-.500' | .050"-.500' |
Voltage (AC) (1ph/50-60Hz) | 115/230 | 230 | 230 |
Dimensions (L x W) | 90" x 45" | 105'x 60" | 116'x 72" |
Optional Equipment:
Hold-down Ring
"Spider" Hold -down
Steel Rollers
Table Ring
Casters
Tubing Carrier Hold-down set
Threaded Stem and Nut (for spools)
Arm and Pulley assembly (for smaller diameter wire)